
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X35-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X35-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 15 to 35 mm, letting you dial back the 35 mm nominal stroke by up to 20 mm during commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE or DMSE switches. It uses a PT tapered port and a 20 mm carbon steel rod with an M16x1.5 thread. The rear adjuster acts purely as a travel stop to decelerate the end position, not as a lock to hold the load without live air.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 15 to 35 mm travel window on the fly to accommodate different product sizes without physically replacing the cylinder.
Dial in the exact retract position during initial setup, using the rear stopper to perfect the final deceleration point.
Apply up to 982 N of clamping force at 0.5 MPa on assembly lines where the exact material thickness varies slightly.
Select this 50 mm bore when your application requires precise end-position tuning on a short-stroke setup. Choose this adjustable SAIJ over a fixed-stroke SAI when machine changeovers demand variable end stops rather than swapping the entire cylinder.
For an exact ISO 15552 replacement match, verify the 50 mm bore, 35 mm stroke, -20 adjustment, PT port thread, and standard carbon steel rod. Because the nominal stroke is under 300 mm, side-load risks are minimal, but always ensure the M16x1.5 rod thread is aligned to prevent binding. For load-holding without live pressure, select a SAIL or BSAI cylinder instead.
Quick checklist
The rear adjuster screw allows you to shorten the 35 mm nominal stroke by up to 20 mm. This creates an adjustable usable travel window of 15 to 35 mm, letting you set the exact end position without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.