verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X35-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 35mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke35 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30

The AirTAC SAIJ50X35-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal 35 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 5 to 35 mm.

The external rear stopper allows you to fine-tune the end position at commissioning without swapping hardware. It uses a PT G1/4 port and a 20 mm carbon steel rod with an M16x1.5 thread. The adjuster acts purely as a travel stop and does not hold the load without live air pressure; for position holding, consider the SAIL or BSAI series.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X35-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke35 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×35Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30 Is Used

tune

Machine Changeover

Dial in the exact end-stop between 5 and 35 mm during product size transitions without disassembling the line.

precision_manufacturing

Assembly Positioning

Fine-tune the clamping travel to accommodate varying part tolerances on an automated assembly fixture.

settings_input_component

Stroke Calibration

Set precise retract distances during machine commissioning to prevent overtravel and mechanical binding.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30 the Right Cylinder?

An adjustable stroke is ideal for variable end stops and product changeovers, whereas a fixed SAI cylinder locks you into one dimension. The extruded aluminum barrel includes sensor grooves on both sides for adding CMSE or DMSE switches.

For ISO 15552 replacement matching, ensure the target cylinder shares the 50 mm bore, 35 mm nominal stroke, 30 mm adjustment capability, PT G1/4 port, and standard mounting interface. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is under 300 mm, side-load risks are minimal, but external guides are still recommended for heavy lateral loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30 FAQ

At the maximum 1.0 MPa pressure, it provides up to 200 kgf.

The rear adjuster screw lets you shorten the effective travel from the nominal 35 mm down to as little as 5 mm, giving a 5 to 35 mm adjustable window. This stopper only sets the end position; it does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X35-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X35-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.