
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X350-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 350mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X350-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated adjustment screw allows you to trim the effective travel down by up to 10 mm, creating a precise 340-350 mm usable window for exact end-position tuning.
This model features a standard carbon steel piston rod and PT tapered port threads (G1/4). Because the nominal stroke is 350 mm, the 20 mm rod diameter and M16x1.5 rod thread should be paired with an external guide to prevent excessive side-loading on the unsupported length. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X350-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 340-350 mm end-stop during product size changes without swapping cylinders or adding external mechanical stops.
Achieve precise end-position tuning on long-stroke assembly presses, compensating for mechanical tolerance stack-up.
The 10 mm rear adjuster acts purely as a mechanical stop for fine-tuning the retract end during machine setup or product changeover, meaning it does not hold the load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve.
To match this exact ISO 15552 interchangeable replacement, specify: 50 mm bore, 350 mm stroke, 10 mm adjustment range, PT port threads, and your required mounting style. SAIJ supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that this unit does not include a magnet (-S), so position sensing is not possible without a model change.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjusting screw acts as a mechanical stop that allows you to shorten the 350 mm nominal stroke by up to 10 mm, giving a usable travel window of 340-350 mm. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.