verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X375-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke375 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$124.66 $132.16Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S

The AirTAC SAIJ50X375-20-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.

This -S variant includes a magnet for CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. It uses a PT tapered port and carbon steel rod, while the rear screw acts purely as a travel stop for end-position tuning rather than a load lock.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke375 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×375Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S Is Used

tune

Product Changeover

Dial in the 355-375 mm travel window during format changes on packaging lines without physically replacing the actuator.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract position at machine commissioning to achieve precise mechanical stops for critical tooling.

conveyor_belt

Variable Diverting

Adjust the stroke length on the fly to accommodate different package sizes moving down an assembly conveyor.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S the Right Cylinder?

Choose this 50 mm bore when an application requires moderate thrust and exact end-position tuning without swapping cylinders or adding external stops. If your setup needs less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa; stepping up to a 63 mm bore provides 1559 N. Because the stroke is 375 mm, an external guide is recommended to handle side loads and protect the 20 mm rod thread.

For an exact ISO 15552 replacement, match the 50 mm bore, 375 mm stroke, 20 mm adjustment, PT port thread, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. If your process requires holding a load without live air pressure, select a SAIL lock or BSAI clamp-lock cylinder instead, as the SAIJ adjuster cannot hold loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S FAQ

The rear adjuster screw allows you to shorten the effective travel by up to 20 mm, creating a 355-375 mm usable window. It functions as a mechanical stop for end-position tuning and does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X375-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.