
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X375-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X375-30 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability eliminates the need to swap cylinders or bolt on external stops when finalizing end positions.
The extruded aluminum barrel integrates sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors. A standard carbon steel rod with an M16x1.5 thread handles moderate side loads, though the 375mm travel length still requires an external guide to prevent rod binding. The rear stopper acts purely as a travel end deceleration device and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end position by up to 30mm when switching between product sizes on a packaging line, avoiding mechanical cylinder swaps.
Fine-tune the final resting position during machine commissioning to achieve exact 345 to 375mm travel distances without adding external stopper blocks.
The 30mm adjustment window is ideal for product changeovers on a line, letting operators fine-tune the retract end position without replacing the cylinder. For load-holding without continuous air pressure, this cylinder is insufficient as the rear adjuster is only a stop, not a lock; consider the SAIL or BSAI series instead.
Because the 375mm stroke exceeds 300mm, an external guide rail is strongly recommended to support the load and prevent excessive side-load wear on the M16x1.5 rod and seals. To match this ISO 15552 replacement exactly, specify a 50mm bore, 375mm stroke, 30mm adjustment range, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At 0.9 MPa, the push force increases to 1767N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 375mm down to a minimum of 345mm. This creates a 30mm adjustable window for fine-tuning end positions at commissioning, but it acts as a stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.