
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X375-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 375mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X375-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This on-machine adjustability allows operators to dial in exact end positions during commissioning without swapping hardware.
Built with a carbon steel piston rod and a PT tapered port, this extruded aluminum barrel design includes sensor grooves on both sides for flexible switch placement. The rear adjuster functions strictly as a travel stop to set the retraction endpoint, meaning it will not hold a load safely without continuous live air pressure. For position holding without pneumatic pressure, an external rod lock or a related SAIL lock cylinder is required.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X375-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 300-375mm travel window on packaging lines when switching to different carton sizes without changing the cylinder.
Fine-tune the exact retraction end-stop during machine setup to perfect material feeding positions and avoid mechanical hard stops.
Dial in precise stroke limits for multi-stage assembly processes where the exact end-of-travel point must be tweaked on the fly.
The adjustable stroke is chosen over a fixed SAI cylinder when product sizes change on a line, allowing rapid 300-375mm travel adjustments. To replace an ISO 15552 cylinder, match the 50mm bore, 375mm stroke, PT port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Because the 375mm stroke is relatively long, the 16mm carbon steel rod will experience amplified side-loading if the load is unsupported. Always guide the load externally to prevent binding. Note that this model lacks a magnet; adding the -S option enables CMSE reed and DMSE electronic sensors for position feedback.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves up to 200 kgf.
The rear adjuster acts as a mechanical stop that shortens the 375mm nominal stroke by up to 75mm, creating a usable travel window of 300-375mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.