verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke40 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10

The AirTAC SAIJ50X40-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 30-40 mm usable travel window, allowing you to dial back the 40 mm nominal stroke by up to 10 mm during machine setup.

The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure. This extruded aluminum cylinder includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, though a magnet is not specified for this configuration. It uses a standard carbon steel rod and PT tapered ports.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X40-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10 Is Used

tune

Machine Setup Tuning

Dial in the exact 30-40 mm end position during commissioning without swapping cylinders or adding external stopper blocks.

settings_input_component

Product Changeover

Quickly adjust the stroke by up to 10 mm on packaging lines when handling slightly different product sizes.

precision_manufacturing

End-Stop Calibration

Fine-tune the retract end position to perfect the pressing or clamping depth on moderate-force assemblies.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10 the Right Cylinder?

If you need less force, the 40 mm bore provides 628 N; if your load demands more, the 63 mm bore offers 1559 N. The 10 mm adjustment range is perfect for product changeovers where fixed-stroke SAI cylinders would require external shims.

Because the stroke is only 40 mm, side-load stress is minimal, but always guide long unsupported rods. Remember that the rear adjuster is a stop, not a lock; for load-holding without live air, consider the SAIL or BSAI series. This SKU is dimensionally interchangeable per ISO 15552 and features a PT tapered port.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10 FAQ

The rear adjuster screw lets you shorten the 40 mm nominal stroke by up to 10 mm, giving a usable travel window of 30-40 mm. It acts as a mechanical stop for end-position tuning and is not a lock, meaning it cannot hold a load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X40-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.