verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke40 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20

The AirTAC SAIJ50X40-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 20 to 40 mm, allowing you to dial back the 40 mm nominal stroke by up to 20 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This model uses a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread. The rear adjuster acts purely as a travel stop for end-position tuning; it does not hold the load without live air pressure. For load-holding requirements, explore the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X40-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20 Is Used

tune

End-Position Tuning

Dial in the exact retract distance within the 20 to 40 mm window during machine setup without physically changing the cylinder.

settings_input_component

Product Changeover

Quickly adapt the stroke end-stop on automated lines when handling different product sizes or varying material thicknesses.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20 the Right Cylinder?

The adjustable stroke is ideal for product changeovers or fine-tuning the end position without swapping the cylinder or adding external stops. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

When replacing an ISO 15552 cylinder, match the 50 mm bore, 40 mm stroke, 20 mm adjustment, PT port, and standard carbon steel rod. Because it lacks a magnet, it does not support CMSE or DMSE sensors. The 40 mm stroke is short enough that side-loading from an unsupported load is minimal, but external guides are still recommended for optimal seal longevity.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20 FAQ

The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 40 mm nominal stroke by up to 20 mm. This creates a usable travel window of 20 to 40 mm for fine-tuning the retract end position without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X40-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.