verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke40 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30

The AirTAC SAIJ50X40-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This yields a highly adaptable 10-40 mm usable travel window, allowing you to fine-tune the retract end-position during commissioning without swapping hardware.

This extruded aluminum profile cylinder omits the FB, CA, CB, and CR mounts, utilizing a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. It includes a 20 mm carbon steel rod with an M16x1.5 thread, G1/4 PT ports, and variable air cushions at both ends. The rear screw acts purely as a travel stop for deceleration, not a load-holding lock, so external pilot-operated check valves are required to maintain position without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X40-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×40Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30 Is Used

tune

Precision End-Stop Tuning

Dial in the exact 10-40 mm retract position during machine commissioning to achieve perfect part contact without machining custom spacers.

settings_input_component

Product Size Changeover

Quickly adapt the cylinder's effective stroke on automated lines when switching between different product heights or formats.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30 the Right Cylinder?

The adjustable 10-40 mm travel window is optimal for applications requiring exact end-stop tuning during machine setup or product changeover, replacing the need for fixed external stops.

When ordering, verify the 40 mm nominal stroke, 30 mm adjustment range, G1/4 PT port thread, and required mounting bracket. Because the stroke is short, side-loading is minimal, but always ensure the 20 mm carbon steel rod is properly aligned. For load-holding without continuous air supply, consider the SAIL or BSAI series instead of relying on the rear stopper.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw allows you to trim the effective travel back by up to 30 mm from the 40 mm nominal stroke, creating a 10-40 mm usable travel window. It functions as a mechanical stop and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X40-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.