
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X40-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 50mm bore and a 40mm nominal stroke, but the external adjusting screw allows you to dial back the travel by up to 30mm. This creates a highly versatile 10-40mm usable stroke window, perfect for dialing in exact end positions during machine commissioning without swapping hardware.
It includes a magnet for position sensing with CMSE reed or DMSE electronic switches, uses PT tapered ports, and relies on variable air cushions at both ends to decelerate the load. Remember that the rear adjuster acts only as a travel stop, not a lock, so it cannot hold a load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10-40mm travel distance during machine setup to perfect end-of-stroke positioning without machining custom external stoppers.
Quickly adjust the effective stroke on automated lines when handling slightly different product sizes, reducing downtime between runs.
The adjustable stroke is ideal for product changeovers where end-of-stroke positioning varies, saving you from machining custom external stops or maintaining multiple fixed-stroke SAI cylinders. To match an ISO 15552 replacement, verify your need for a 50mm bore, 40mm stroke, up to 30mm adjustment, PT ports, and a magnet for CMSE/DMSE sensors. For load-holding without continuous air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that lets you shorten the 40mm nominal stroke by up to 30mm, providing a usable travel window of 10-40mm. It sets the end position but does not lock the load without live air.
At 0.7 MPa, the push force increases to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.