
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X40-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The defining feature of this SKU is its full-range adjustment capability, allowing the effective travel to be dialed back from 40 mm down to 0 mm. This provides total flexibility for setting exact end positions during commissioning without needing external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It uses a standard carbon steel piston rod with an M16x1.5 thread, paired with a PT tapered port. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for dead-load holding, consider the SAIL or BSAI variants.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for dialing in the exact retraction point on testing fixtures where the 0-40 mm travel window must be fine-tuned on the fly without swapping cylinders.
Ideal for packaging lines that handle multiple product sizes, allowing operators to quickly adjust the stroke end-point to accommodate varying package dimensions.
Provides precise clamping force at 0.5 MPa with a highly adjustable short stroke, ensuring delicate components are held firmly without over-traveling.
If your application requires less force, the 40 mm bore offers 628 N; for heavier loads, the 63 mm bore provides 1559 N. The SAIJ50X40-40 is selected over a fixed SAI cylinder when a machine requires frequent product-size changeovers that demand a completely variable end-stop.
To match this exact configuration for an ISO 15552 replacement, specify a 50 mm bore, 40 mm stroke, 40 mm adjustment range, PT port thread, and no magnet (-S). Because the stroke is under 300 mm, side-loading risks are minimal, but ensure the M16x1.5 rod thread is properly aligned to avoid binding. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjusting screw allows you to trim the effective stroke by up to 40 mm. Since the nominal stroke is 40 mm, this creates a 0-40 mm usable travel window, letting you set the exact end position during commissioning. The adjuster is a stop, not a lock, so air pressure must be maintained to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.