
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X40-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 40mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X40-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 40 mm nominal stroke that can be dialed back by up to 40 mm, yielding a highly versatile 0-40 mm usable travel window for exact end-position tuning.
This variant includes a magnetic piston for position sensing via CMSE reed or DMSE electronic switches. The carbon steel rod and M16x1.5 thread provide robust load handling, while the extruded aluminum barrel incorporates sensor grooves on both sides. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X40-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-40 mm travel needed when switching between product sizes on a packaging line, eliminating the need to physically swap cylinders.
Fine-tune the retract end-position during machine commissioning to achieve perfect alignment without adding bulky external mechanical stops.
Leverage the magnetic piston with DMSE electronic sensors to confirm stroke position across the adjustable range in automated sorting gates.
If you need less force, the 40 mm bore offers 628 N; if your load is heavier, stepping up to the 63 mm bore provides 1559 N. For this SAIJ50X40-40-S, ensure you specify the PT port thread, the 40 mm adjustment range, and the -S magnet when matching ISO 15552 dimensions. Because the stroke is under 300 mm, side-load concerns are minimal, though external guides are still recommended for optimal rod longevity.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 40 mm. This creates a 0-40 mm usable travel window for fine-tuning the end position at commissioning without swapping the cylinder.
At 0.7 MPa, the push force increases to 1374 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.