verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X400-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke400 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$124.66 $132.16Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S

The AirTAC SAIJ50X400-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. A built-in magnet enables position sensing with CMSE reed and DMSE electronic switches. This unit uses a standard carbon steel rod and PT tapered port threads.

The external rear stopper allows you to fine-tune the end position during commissioning, shortening the 400mm nominal stroke by up to 20mm. This creates a precise 380-400mm usable travel window without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke400 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S Is Used

settings_input_component

Machine Changeover

Dial in the exact 380-400mm end position during product size changes without swapping the cylinder or adding external mechanical stops.

precision_manufacturing

End-Stop Tuning

Fine-tune the retract stroke by up to 20mm during commissioning to perfect the seating of parts or tooling alignment.

conveyor_belt

Variable Positioning

Adjust the travel limit on the fly for packaging lines that process multiple carton sizes requiring different stroke endpoints.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring exact end-position tuning during product changeovers. Because the 400mm stroke is long, use an external guide to prevent excessive side loads on the 20mm rod.

The rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For fail-safe load holding, select a SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This unit is dimensionally interchangeable per ISO 15552 and includes a magnet for sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S FAQ

At the maximum 1.0MPa pressure, it delivers up to 200kgf.

The rear adjuster screw lets you shorten the 400mm nominal stroke by up to 20mm, providing a usable travel window of 380-400mm. This stopper only sets the end position and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X400-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.