
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X400-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X400-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 325-400 mm usable travel window by allowing you to trim up to 75 mm from the 400 mm nominal stroke.
The integrated rear stopper enables precise end-position tuning during commissioning without adding external stops. The 20 mm diameter carbon steel rod and M16x1.5 thread handle side loads well, but at 400 mm of travel, an external guide is recommended to prevent rod deflection. This model uses a PT tapered G1/4 port and includes adjustable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X400-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 325-400 mm travel window to accommodate different product lengths on the same conveyor line without swapping cylinders.
Fine-tune the retract stroke during setup to perfect the alignment of tooling, avoiding the need for external mechanical stops.
Adjust the effective stroke by up to 75 mm to compensate for mechanical wear or to tweak the resting position of a payload.
The adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops for quick product changeovers.
Because the rear adjuster acts only as a travel stop and the cushions manage deceleration, neither will hold a load without live air pressure. For fail-safe load holding, consider an external pilot-operated check valve, or use the related SAIL or BSAI series. To match this ISO 15552 footprint exactly, specify the 50 mm bore, 400 mm stroke, 75 mm adjustment, PT port, and standard mounting options (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster allows you to shorten the effective travel from the 400 mm nominal stroke down to 325 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.