
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X425-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X425-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 425mm nominal stroke that can be fine-tuned down by up to 10mm, creating a precise 415-425mm usable travel window for commissioning without external stops.
This extruded aluminum profile barrel includes sensor grooves on both sides for flexible mounting. It uses a standard carbon steel rod with an M16x1.5 thread and PT tapered ports. The rear adjustment mechanism acts strictly as a travel stop to set end positions, so live air pressure is required to hold the load.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X425-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 415-425mm travel window during machine commissioning to perfect product positioning without adding physical shims.
Quickly adjust the rear stopper by up to 10mm to accommodate slight length variations when switching between product sizes on a packaging line.
The 10mm adjustable range is perfect for dialing in exact end stops during machine setup or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder.
Because the stroke is 425mm, an external guide is recommended to prevent excessive side loading on the M16x1.5 rod. For load-holding without continuous air pressure, this cylinder is not a lock; consider an AirTAC SAIL or BSAI cylinder instead. ISO 15552 interchangeability ensures it matches standard mounting footprints using PT ports.
Quick checklist
At the maximum 1.0MPa pressure, it delivers up to 200kgf.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 425mm nominal stroke by up to 10mm. This creates a 415-425mm travel window for fine-tuning end positions without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.