
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X425-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X425-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 425 mm stroke that can be fine-tuned backward by up to 100 mm, yielding a usable travel window of 325 to 425 mm. The extruded aluminum barrel features sensor grooves on both sides for straightforward position detection.
This model features a carbon steel piston rod with an M16x1.5 thread and a PT tapered port. The rear adjuster acts purely as a mechanical stop to set the end position during commissioning; it does not lock the load without continuous air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X425-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 325 and 425 mm during machine setup without physically replacing the actuator.
Quickly adapt a packaging line to different carton lengths by turning the rear adjuster screw to shift the end position.
If you need less force, the 40 mm bore offers 628 N; if your load is heavier, stepping up to the 63 mm bore provides 1559 N. The 100 mm adjustment range is ideal for product changeovers on a packaging line, allowing you to dial in the exact travel without swapping the cylinder or adding external stops.
Because the 425 mm stroke is relatively long, the 20 mm diameter carbon steel rod will need external guide support to prevent excessive side-loading and premature seal wear. This SKU uses a PT tapered port and supports the SAIJ mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552.
Quick checklist
If operated at 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm. This creates a usable travel window from 325 mm to 425 mm, letting you fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.