
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X425-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X425-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 425 mm stroke that can be fine-tuned backward by up to 20 mm, giving operators a precise 405-425 mm usable travel window during commissioning.
This extruded aluminum profile cylinder includes variable air cushions at both ends and sensor grooves on two sides. The rear stopper screw sets the retract end position without requiring external stops, though it acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X425-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 405-425 mm travel window on packaging lines when switching between different carton sizes without physically swapping the cylinder.
Fine-tune the retract end-position during initial commissioning to avoid mechanical hard stops and simplify assembly alignment.
Adjust the stroke on the fly for diverter gates on conveyors, allowing precise routing of varying product lengths.
The adjustable 405-425 mm window is ideal for product changeovers or dialing in exact end positions, whereas a fixed SAI cylinder locks you into a single 425 mm dimension. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Because the 425 mm stroke is relatively long, the 20 mm rod should be guided externally to prevent excessive side-loading and premature seal wear. If the machine requires true load-holding without continuous air pressure, a plain SAIJ will not suffice; consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock, or an external rod lock instead.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the effective travel from the 425 mm nominal stroke by up to 20 mm, creating a 405-425 mm window. It functions as a physical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.