
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X425-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 425mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X425-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 385 to 425 mm, allowing you to dial back the nominal 425 mm stroke by up to 40 mm. The extruded aluminum barrel includes sensor grooves on both sides for straightforward position feedback.
This model uses a PT tapered port and a 20 mm carbon steel rod with an M16x1.5 thread. Because the 425 mm stroke is relatively long, the rod diameter provides decent side-load resistance, though an external guide is recommended for unsupported loads. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X425-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance up to 40 mm during packaging format changes without disassembling the line.
Fine-tune the end-of-stroke position during commissioning to achieve precise sensor triggering and alignment.
Adapt the cylinder travel window on the fly for assemblies requiring exact 385 to 425 mm clamping depths.
If you need less force, stepping down to a 40 mm bore provides 628 N; if you need more, a 63 mm bore offers 1559 N. The adjustable stroke is ideal for machine setup and product changeovers, letting you fine-tune the retract position without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, use a SAIL or BSAI cylinder instead, as the SAIJ adjuster is a stop, not a lock. When replacing an ISO 15552 cylinder, match the 50 mm bore, 425 mm stroke, 40 mm adjustment, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Given the 425 mm stroke, ensure an external guide supports the load to prevent rod binding.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster lets you mechanically shorten the effective stroke by up to 40 mm, creating a usable travel window of 385 to 425 mm. It functions as a travel stop for fine-tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.