verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X45-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke45 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20

The AirTAC SAIJ50X45-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated adjustment screw allows you to trim the nominal 45mm stroke back by up to 20mm, creating a precise 25-45mm usable travel window for fine-tuning end positions during commissioning.

This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. It uses a PT tapered port thread and a 20mm carbon steel rod. The rear adjuster acts strictly as a travel stop to set the retraction end, meaning it cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X45-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20 Is Used

tune

Machine Changeover

Dial in the 25-45mm travel window during product size transitions to set new retraction points without physically replacing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the final retract position at commissioning to achieve exact placement accuracy using the rear stopper screw.

settings_input_component

Variable End Stops

Adjust the effective stroke on the fly for automated assembly lines requiring flexible material positioning.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20 the Right Cylinder?

Select this 50mm bore cylinder when an application requires variable end-stops or frequent product-size changeovers without swapping out physical components. If you need less force, stepping down to a 40mm bore yields 628N at 0.5MPa, while stepping up to a 63mm bore provides 1559N. The adjustable 25-45mm window allows operators to dial in the exact retraction point on the fly, a major advantage over a fixed-stroke SAI cylinder.

To match this ISO 15552 interchangeable cylinder exactly, confirm the 50mm bore, 45mm nominal stroke, 20mm adjustment range, PT port threads, and standard carbon steel rod. Because this is a non-magnet model, position sensing requires adding an -S magnet to the piston for CMSE or DMSE switches. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20 FAQ

The rear adjuster screw acts as a mechanical stop that shortens the 45mm nominal stroke by up to 20mm. This creates a usable travel window of 25-45mm, allowing you to set the exact retraction end-point without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X45-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.