
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X45-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X45-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 5 to 45 mm, allowing you to dial back the 45 mm nominal stroke by up to 40 mm.
This extruded aluminum barrel design includes sensor grooves on both sides, though this specific configuration omits the -S magnet. It uses a PT tapered port thread and a standard carbon steel piston rod. The rear adjuster acts strictly as a travel stop to fine-tune end positions at commissioning, so live air is still required to hold the load.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 5 to 45 mm end-stop during product size changes without swapping out the entire cylinder or adding external stopper blocks.
Leverage the extruded aluminum barrel's dual sensor grooves to mount CMSE reed or DMSE electronic switches exactly where the adjusted stroke ends.
Choose this 50 mm bore adjustable-stroke cylinder when you need variable end-stops for product changeovers rather than a fixed-stroke SAI cylinder. For higher force demands, moving up to a 63 mm bore provides 1559 N. To match this ISO 15552 interchangeable unit, specify the 50 mm bore, 45 mm stroke, 40 mm adjustment, PT port, and no magnet.
Because the stroke is under 300 mm, side-load risks are minimal, though the 20 mm rod diameter and M16x1.5 thread handle standard lateral stresses well. Remember that the rear adjuster and air cushions decelerate the travel end but do not function as a lock; for load-holding without live air pressure, consider an external rod lock or the AirTAC SAIL or BSAI series. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the 45 mm nominal stroke by up to 40 mm, creating a usable travel window of 5 to 45 mm. This stopper fine-tunes the end position but does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.