
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X45-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X45-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a built-in magnet for position sensing. With a 45 mm nominal stroke and a 40 mm adjustment range, it provides a highly versatile 5 to 45 mm usable travel window for precise end-position tuning at commissioning.
The extruded aluminum barrel includes sensor grooves on both sides, fully compatible with CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop to set the travel end and does not lock the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X45-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact end-of-stroke position during initial setup without machining external stopper blocks.
Quickly dial back the stroke from 45 mm down to 5 mm to accommodate varying package sizes on a packaging line.
Set precise retract positions for clamping or pressing tasks where the material thickness fluctuates.
Choose this adjustable model when a fixed-stroke SAI cylinder cannot accommodate product size variations or fine-tuning during machine commissioning. The 40 mm adjustment window on a 45 mm stroke allows the end-stop to be dialed back precisely without swapping the actuator. For holding loads without live air pressure, the rear stopper is insufficient; consider an SAIL air-released lock cylinder or an external pilot-operated check valve.
This cylinder uses PT tapered port threads (G1/4) and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR mounts found on some standard actuators. Dimensionally interchangeable per ISO 15552, it integrates seamlessly into existing footprints.
Quick checklist
The rear adjuster screw acts as a mechanical stop that trims the effective stroke back by up to 40 mm. On this 45 mm nominal stroke cylinder, you can set the usable travel window anywhere between 5 and 45 mm without changing the actuator itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.