
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X450-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X450-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position during commissioning. With a 450 mm nominal stroke and a 30 mm adjustment range, it provides a usable travel window of 420-450 mm.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific configuration omits the -S magnet. It features a carbon steel piston rod with an M16x1.5 thread, PT tapered porting (G1/4), and variable air cushions at both ends. Remember that the rear adjuster acts strictly as a travel stop for deceleration and positioning, not as a load-holding lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X450-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop during product size transitions using the 30 mm rear adjuster, avoiding the need to physically swap out cylinders on the production line.
Provides a 420-450 mm travel window to precisely tune the retract position of conveyor diverter arms or pusher mechanisms during commissioning.
The 30 mm rear adjuster is ideal for machine setups requiring variable end-stops or product-size changeovers without physically swapping the cylinder. To replicate this exact configuration, match the 50 mm bore, 450 mm stroke, 30 mm adjustment, PT port thread, carbon steel rod, and no magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the 450 mm stroke creates a long unsupported rod extension, using an external guide is highly recommended to prevent excessive side-loading and premature seal wear. If your process demands true load-holding without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster cannot hold a load unpowered. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
At its maximum rated pressure of 1.0 MPa, it can deliver up to 200 kgf (1961 N).
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm from the 450 mm nominal length, giving a usable travel window of 420-450 mm. This stopper fine-tunes the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.