
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X450-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X450-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a generous 450 mm nominal stroke that can be dialed back by up to 75 mm, yielding a precise 375-450 mm usable travel window for fine-tuning end positions at commissioning.
This model features a carbon steel piston rod with an M16x1.5 thread and utilizes PT tapered port threads for secure pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, allowing direct mounting of CMSE reed or DMSE electronic sensors if position feedback is later required. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X450-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 375-450 mm travel window during product size changeovers to set new end positions without swapping out the entire cylinder or bolting on external stops.
Fine-tune the diverting stroke on a packaging line to accommodate different carton lengths, using the rear screw to precisely set the retraction endpoint.
An adjustable stroke is highly beneficial over a fixed SAI cylinder when you need variable end-stops for product changeovers or exact end-position tuning without adding external stopper blocks. To replace an ISO 15552 cylinder, match the 50 mm bore, 450 mm stroke, 75 mm adjustment, G1/4 port, and preferred mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the 450 mm stroke is relatively long, the 20 mm diameter rod will experience greater deflection under side loads; an external guide rail is recommended to prevent rod binding and premature seal wear. Remember that the rear adjuster and integrated air cushions only decelerate the load at travel end—they do not function as a lock. For load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm, creating a usable travel window of 375-450 mm. It acts as a mechanical stop to fine-tune the end position at commissioning without changing the cylinder, but it is not a lock and does not hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.