
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X475-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 475mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X475-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 435 to 475 mm, enabling precise end-position tuning at commissioning without swapping out the unit.
This model uses a PT G1/4 port and includes variable air cushions at both ends to manage deceleration. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though a magnet is not included in this base configuration. The rear stopper simply trims the travel range and is not a locking device.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X475-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 435 to 475 mm travel distance during initial commissioning to perfectly seat parts without re-machining hard stops.
Quickly adapt the end-of-stroke position by up to 40 mm when running different product sizes on the same conveyor setup.
Fine-tune the retract stroke on the fly to accommodate varying material thicknesses in automated clamping fixtures.
The 40 mm adjustment range is ideal for product changeovers on a line, allowing you to dial in the exact end-stop without adding external physical stops. Because the standard SAIJ lacks a lock, an external rod lock or pilot-operated check valve is required if you need to hold a load without live air pressure.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 475 mm stroke, PT G1/4 port, and the 40 mm adjustment code. Since the 475 mm stroke is relatively long, the 20 mm rod will experience side-loading if the load is unsupported; always use an external guide rail to prevent premature wear.
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw acts as a physical stop that lets you shorten the nominal 475 mm stroke by up to 40 mm, giving an adjustable travel window of 435 to 475 mm. It only sets the travel end and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.