
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X50-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X50-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. The integrated rear stopper allows you to trim the effective travel, creating a precise 40-50mm usable window to fine-tune the end position without adding external stops.
This model uses a G1/4 port and a 20mm carbon steel rod with an M16x1.5 thread. The extruded aluminum barrel includes sensor grooves on both sides, enabling the addition of CMSE reed or DMSE electronic switches if a magnet is required later. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 40-50mm travel window during product size changeovers to set new end positions without swapping the entire actuator.
Fine-tune the retract stroke during commissioning to compensate for mechanical wear or minor fixture misalignments on the assembly line.
Use the rear stopper screw to establish precise variable end-stops for delicate pressing operations requiring strict depth control.
Choose this 50mm bore when you need more force than the 40mm version (528N pull at 0.5 MPa) but want a smaller footprint than the 63mm cylinder. The 10mm adjustment range is ideal for product changeovers, letting you dial in the exact end-stop during commissioning rather than machining custom spacers. For strokes of 300mm or more, always use an external guide to prevent side-loading damage.
Remember that the rear adjuster functions only as a travel stop and does not hold the load without live air pressure. If your application requires true fail-safe load holding, consider the SAIL air-released lock or BSAI clamp-lock cylinders instead of relying on the cushion or adjuster. This cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The SAIJ50X50-10 has a nominal 50mm stroke with a 10mm adjustment range, allowing you to shorten the effective travel to anywhere between 40mm and 50mm using the rear stopper screw.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.