
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X50-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X50-20 is a double-acting, adjustable-stroke ISO 15552 profile cylinder featuring a 50mm bore and a 50mm nominal stroke. An integrated rear stopper screw allows you to trim the effective travel back by up to 20mm, creating a precise 30-50mm usable stroke window for exact end-position tuning during commissioning.
This model features a standard carbon steel piston rod with an M16x1.5 thread, paired with G1/4 PT air ports. The extruded aluminum barrel includes sensor grooves on both sides for straightforward switch placement. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, intentionally omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact retract distance within a 30-50mm window during machine commissioning without changing hardware.
Quickly dial in a new end-stop position when switching between different product sizes on a packaging line.
Set precise mechanical limits for clamping or pressing tasks where the final position must be adjusted on the fly.
If you need less force, stepping down to a 40mm bore provides 628N at 0.5MPa, while stepping up to a 63mm bore yields 1559N. The adjustable rear stopper is ideal for machine setups requiring variable end stops or product changeovers, eliminating the need to physically swap cylinders or bolt on external stops. Because the stroke is only 50mm, side-loading is minimal, but always ensure the load is guided to prevent premature seal wear.
When replacing an ISO 15552 cylinder, match the 50mm bore, 50mm stroke, 20mm adjustment range, G1/4 PT port thread, and the required mounting bracket. Note that the rear adjuster acts strictly as a travel stop and does not function as a lock; the cylinder cannot hold a load without continuous air pressure. For load-holding requirements without live air, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
The cylinder has a 50mm nominal stroke, but the built-in rear adjuster screw lets you shorten the effective travel by up to 20mm. This provides a usable stroke window of 30 to 50mm, which can be fine-tuned during setup.
At 0.7MPa, the push force increases to 1374N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.