verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X50-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke50 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30

The AirTAC SAIJ50X50-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal 50 mm stroke and a 30 mm adjustment range, it provides a highly flexible 20-50 mm usable travel window.

Unlike a fixed-stroke SAI cylinder, this model integrates an external stopper screw at the rear to fine-tune the retract end position during commissioning. The adjuster functions purely as a travel stop and does not hold the load without live air pressure. It features an extruded aluminum barrel with sensor grooves on both sides, accepting CMSE reed and DMSE electronic switches when a magnet is specified.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X50-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke50 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30 Is Used

settings_input_component

Machine Changeover

Dial in the exact retract position within the 20-50 mm window when switching product sizes on a packaging line.

precision_manufacturing

Variable End-Stop

Use the rear adjusting screw to set precise end-of-stroke limits for assembly operations without external stops.

tune

Commissioning Tuning

Fine-tune the final resting position during machine setup to align tooling perfectly before locking down settings.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30 the Right Cylinder?

If your setup demands less force, stepping down to a 40 mm bore yields 628 N; if more force is needed, a 63 mm bore provides 1559 N. Because the stroke is under 300 mm, side-load concerns are minimal, though the 16 mm rod and M12x1.25 thread still handle standard operational loads effectively.

The rear adjuster allows precise end-position tuning without swapping the cylinder or adding external stops. For true load-holding without live air pressure, this plain cylinder is insufficient—consider the SAIL (air-released lock) or BSAI (clamp-lock) variants instead. This unit uses a PT tapered port thread, carbon steel rod, and the standard SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm. This creates a usable travel window from 20 mm to 50 mm, letting you fine-tune the end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X50-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.