
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X50-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X50-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster.
This unit includes a standard carbon steel rod and a tapered PT port. The built-in magnet supports CMSE reed and DMSE electronic sensors for precise position feedback. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on adjustable air cushions at both ends to decelerate the load.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X50-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-50mm retract distance instantly when swapping product sizes on a packaging line, eliminating the need for mechanical spacers.
Perfect for dialing in the final resting position of a clamping jaw during initial setup, ensuring parts are held securely without overtravel.
Allows operators to adjust the effective stroke on the fly for testing different sensor trigger points using the integrated CMSE or DMSE switches.
Choose this adjustable model when you need to fine-tune the retract end-stop during commissioning or product changeovers without adding external stops. If your application requires less force, stepping down to a 40mm bore yields 628N at 0.5MPa; if you need more power, a 63mm bore provides 1559N. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series.
This cylinder is dimensionally interchangeable with ISO 15552 cylinders. To match this exact configuration, specify a 50mm bore, 50mm stroke, 50mm adjustment range, PT tapered port thread, carbon steel rod, and the -S magnet option for sensor compatibility.
Quick checklist
At 0.7 MPa, the push force increases to 1374N.
The rear adjuster screw allows you to trim the effective travel back by up to 50mm from the nominal 50mm stroke, creating a 0 to 50mm usable travel window. It acts as a mechanical stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.