
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X500-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X500-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 480 to 500 mm, allowing you to dial back the nominal 500 mm stroke by up to 20 mm during commissioning.
This model features a 20 mm carbon steel rod with an M16x1.5 thread, paired with 30 mm air cushions at both ends to manage kinetic energy. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE and DMSE switches. The rear stopper acts purely as a travel end-deceleration device, not a load lock.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X500-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 480-500 mm end position during product size changes on a packaging line without replacing the cylinder.
Fine-tune the retract position to compensate for mechanical wear or sensor drift over time.
The 20 mm adjustment range is ideal for product changeovers where exact end-positioning varies slightly, avoiding the need to physically swap a fixed-stroke SAI cylinder or bolt on external stops. For applications requiring position holding without live air pressure, select the SAIL or BSAI series instead, as the SAIJ adjuster cannot hold loads.
Because this is a 500 mm stroke, the 20 mm rod experiences leverage forces over a long unsupported distance. An external guide is recommended to prevent side-load damage to the seal. This SAIJ configuration uses a PT tapered port, carbon steel rod, no magnet, and supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, TCM2.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke from 500 mm down to 480 mm. This creates a 20 mm adjustable travel window for fine-tuning the end position at commissioning without swapping cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.