
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X500-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X500-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows operators to dial in exact end positions during commissioning without adding external stopper blocks.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible switch mounting. It uses a G1/4 port, a 20mm carbon steel rod with an M16x1.5 thread, and variable air cushions at both ends to decelerate the load. The rear adjuster acts strictly as a travel stop for position tuning, not a lock, so it cannot hold loads without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X500-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 470-500mm travel window on packaging lines to accommodate different carton or product sizes without changing the cylinder.
Fine-tune the exact retract distance during machine commissioning to align tooling perfectly, avoiding the cost of custom machined external stops.
Act as an adjustable physical stop on a conveyor sorting line, allowing operators to dial in the exact 30mm trim needed for varying package depths.
The adjustable stroke is ideal for machine setups requiring product changeovers or variable end-stops, replacing the need to swap out a fixed-stroke SAI cylinder. To match this exact unit for an ISO 15552 replacement, specify a 50mm bore, 500mm stroke, 30mm adjustment, PT tapered port threads, and standard carbon steel rod material without a magnet.
Because this model features a 500mm stroke, the extended rod is susceptible to side-loading forces. Even with a robust 20mm rod and M16x1.5 thread, an external guide mechanism should be incorporated to prevent premature seal wear and ensure smooth linear travel. Available mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At a maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 30mm from the 500mm nominal length, providing a usable travel window of 470-500mm. This mechanism functions as a travel stop to set the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.