
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X500-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X500-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By integrating an external adjustment screw, this model provides a usable travel window of 425-500mm, enabling precise end-position tuning without swapping out the entire unit.
This adjuster acts purely as a mechanical stop to set the retract deceleration point and must not be confused with a locking mechanism. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, though this specific SKU lacks the internal magnet. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X500-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 425-500mm window during commissioning to achieve precise end-stop calibration without adding external hard stops.
Adapt a packaging line quickly for different carton sizes by turning the rear adjuster to modify the effective stroke on the fly.
Simplify the initial setup of long-stroke automated machinery by fine-tuning the 500mm nominal travel to the exact required fixture clearance.
Selecting this 50mm bore over a 40mm neighbor steps the thrust up from 628N to 982N at 0.5 MPa, while avoiding the bulk of a 63mm unit. An adjustable stroke is ideal for machine setups requiring variable end stops or product changeovers, offering a 425-500mm window to fine-tune the retract position. Because the 500mm stroke is relatively long, an external guide is recommended to handle side loads and prevent rod binding.
For a direct ISO 15552 replacement match, verify the 50mm bore, 500mm stroke, 75mm adjustment range, PT port thread, and the required mounting hardware. Remember that the rear screw is a travel stop, not a lock; if the application requires load holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
The rear adjuster screw allows you to shorten the 500mm nominal stroke by up to 75mm, creating a 425-500mm usable travel window. It functions as a mechanical stop to fine-tune the end position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.