verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X55-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke55 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.83 $96.33Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S

The AirTAC SAIJ50X55-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 25-55 mm, allowing you to trim up to 30 mm from the 55 mm nominal stroke during machine commissioning.

Equipped with a magnet for position sensing, it works seamlessly with AirTAC CMSE reed and DMSE solid-state switches fitted into the dual-side sensor grooves. The extruded aluminum barrel design uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB and CA options. The standard carbon steel rod features an M16x1.5 thread and a 30 mm cushion length for controlled end-of-travel deceleration.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S Is Used

tune

Product Changeover

Dial in the exact 25 to 55 mm stroke needed when swapping product sizes on a packaging line, avoiding cylinder swaps.

settings_input_component

Sensor Setup

Utilize the integrated magnet with DMSE solid-state sensors to confirm exact end positions after trimming the stroke.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S the Right Cylinder?

Choose this 50 mm bore when an application requires moderate thrust and exact end-position tuning without adding external stops. This adjustable model is preferred over a fixed-stroke SAI cylinder when you need variable end-stops for product changeovers. For dimensionally interchangeable ISO 15552 replacements, match the 50 mm bore, 55 mm stroke, 30 mm adjustment, PT tapered port threads, and the -S magnet option.

Because the stroke is short, side-loading risks are minimal, but the rod and rear adjuster only act as a travel stop. They do not hold the load without live air pressure. For true load-holding, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S FAQ

The rear adjusting screw acts as a mechanical stopper that shortens the effective stroke. For this model, you can trim up to 30 mm from the 55 mm nominal stroke, giving an adjustable travel window of 25 to 55 mm.

At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.9 MPa, the push force increases to 1767 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X55-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.