
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X55-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X55-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 15-55 mm, allowing you to dial back the nominal 55 mm stroke by up to 40 mm. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.
This model uses a PT tapered port thread and a standard carbon steel piston rod. The rear adjuster acts purely as a mechanical stop to set the retracted end position precisely during commissioning. It is not a locking device, so the cylinder will not hold a load without live air pressure. For applications requiring true position holding, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 15 to 55 mm retracted position when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Fine-tune the final retracted position during initial machine commissioning to perfectly align a 982 N clamping or lifting motion.
Adjust the travel window on the fly for automated test fixtures that require slight positional shifts between different component heights.
If you need less force, stepping down to a 40 mm bore yields 628 N; stepping up to a 63 mm bore provides 1559 N. The adjustable stroke is ideal for product-size changeovers, removing the need to swap cylinders or bolt on external stops.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Because the stroke is under 300 mm, side-load stress on the 20 mm rod is minimal, though an external guide is still recommended for heavy lateral loads.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.
The rear adjuster screw lets you mechanically shorten the effective stroke from 55 mm down to as little as 15 mm. This creates a 40 mm tuning window for setting the exact retracted end position without changing the air pressure or adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.