verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X55-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke55 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.83 $96.33Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S

The AirTAC SAIJ50X55-40-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 55 mm stroke that can be dialed back by up to 40 mm, giving you a precise 15 to 55 mm usable travel window for on-the-fly positioning.

This variant includes a standard carbon steel rod and a piston magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and the rear adjuster acts purely as a mechanical stop to set deceleration, not to hold the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke55 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S Is Used

settings_input_component

Variable End-Stop Tuning

Dial in the exact retraction point within the 15-55 mm window during machine commissioning to accommodate varying material thicknesses without hardware changes.

factory

Product Changeover

Quickly adapt the cylinder's effective stroke on the production line when switching between different product sizes, minimizing downtime.

precision_manufacturing

Sensor Calibration Setup

Leverage the integrated magnet and dual sensor grooves alongside the stroke adjuster to perfectly time CMSE or DMSE sensor signals during assembly.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S the Right Cylinder?

The 40 mm adjustment range is ideal for machine setups requiring frequent product changeovers, allowing you to fine-tune the end position without swapping cylinders or adding external stops.

For direct interchangeability, match the 50 mm bore, 55 mm stroke, PT tapered port threads, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because it carries the -S magnet, it directly supports AirTAC CMSE and DMSE switches. Remember that the rear adjuster is a travel stop, not a lock; for position holding without live air, consider the SAIL or BSAI series.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 55 mm nominal stroke by up to 40 mm. This creates a 15 to 55 mm adjustable travel window, letting you fine-tune the end position at commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X55-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.