
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X55-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X55-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 50mm bore and a 55mm nominal stroke, but the external adjusting screw allows you to dial back the travel by up to 50mm, creating a precise 5 to 55mm usable end-position window. This on-the-fly tuning is ideal for commissioning setups where physical stops need frequent tweaking without swapping hardware.
The extruded aluminum barrel incorporates sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU omits the internal magnet. It uses a G1/4 port and a 16mm carbon steel rod with an M16x1.5 thread, while the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X55-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly adjust the end-stop position from 55mm down to 5mm during product size changeovers on a packaging line without changing out the cylinder.
Dial in the exact clamping distance during R&D commissioning, allowing engineers to find the optimal travel window by turning the rear screw.
Set precise retract positions for testing sensors or actuators where the exact end-of-stroke location needs frequent micro-adjustments.
The 50mm adjustment range on a short 55mm stroke is particularly useful for prototyping cells or product changeovers where the exact end-stop changes frequently. Instead of machining custom external spacers for a fixed SAI cylinder, you simply turn the rear screw to trim the travel down to the exact 5mm minimum. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an external rod lock or the AirTAC SAIL series. Because the stroke is under 300mm, side-load concerns are minimal, but the 16mm rod still handles standard lateral forces well.
Quick checklist
At 0.9MPa, the push force increases to 1767N.
The rear adjuster screw lets you shorten the effective travel by up to 50mm. This creates an adjustable usable window between 5mm and 55mm, allowing you to fine-tune the exact end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.