
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X550-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 550mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X550-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the nominal 550 mm travel back by up to 40 mm, creating a precise 510-550 mm usable window.
This adjustable-stop design allows you to fine-tune end positions at commissioning without swapping out the cylinder or adding external stops. It features PT tapered port threads (G1/4) and sensor grooves on both sides of the extruded aluminum barrel, accepting AirTAC CMSE reed and DMSE electronic solid-state switches.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X550-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial the end-of-stroke position back by up to 40 mm when switching between product lengths on a packaging line, avoiding physical cylinder swaps.
Fine-tune the final retract position during setup to perfectly time the tooling impact, ensuring precise alignment without adding external mechanical stops.
Adjust the travel window from 510 to 550 mm on the fly to accommodate varying material widths on a conveyor handling system.
Choose this 50 mm bore when 40 mm bore thrust (628 N at 0.5 MPa) is insufficient but the larger 63 mm bore (1559 N) is oversized. The 40 mm adjustment range is ideal for product changeovers on a line, letting you dial in the exact end-stop without mechanical rebuilds. Because the 550 mm stroke is long, an external guide is recommended to prevent excessive rod side-loading.
Remember that the rear adjuster acts as a travel stop, not a lock; this SAIJ cylinder will not hold a load without live air pressure. For load-holding requirements, select an AirTAC SAIL or BSAI cylinder. To replace this unit with another ISO 15552 cylinder, match the 50 mm bore, 550 mm stroke, 40 mm adjustment, PT port, and -S magnet, ensuring you use the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
An external adjusting screw at the rear of the cylinder acts as a mechanical stop, allowing you to shorten the effective stroke by up to 40 mm. This provides a usable travel window of 510-550 mm, which can be fine-tuned during commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.