verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X60-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke60 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$88.83 $96.33Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S

The AirTAC SAIJ50X60-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling a usable travel window of 50 to 60 mm. The integrated -S magnet allows precise end-position detection using AirTAC CMSE reed or DMSE solid-state sensors mounted into the dual-side barrel grooves.

This model features a carbon steel piston rod with an M16x1.5 thread and PT tapered port threads (G1/4). The external rear stopper screw lets you fine-tune the retract end-position at commissioning without adding external stops. Remember that this adjuster acts purely as a travel stop; it will not hold a load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke60 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S Is Used

tune

Machine Changeover

Fine-tune the 50-60 mm travel window during product size changes on a packaging line without physically swapping the cylinder or adding external stopper blocks.

precision_manufacturing

End-Stop Calibration

Dial in the exact retract position during machine commissioning to compensate for mechanical tolerance stack-up, ensuring precise and repeatable clamping.

factory

Sensor-Driven Positioning

Leverage the integrated -S magnet and dual sensor grooves to trigger CMSE or DMSE switches at the newly adjusted end-stop for automated process control.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S the Right Cylinder?

Select this 50 mm bore adjustable cylinder when you need to dial in a precise end-of-stroke position during machine setup or product changeover, rather than relying on a fixed-stroke SAI variant. For load-holding without continuous air pressure, this standard SAIJ is insufficient—consider the SAIL pneumatic lock or BSAI clamp-lock series instead.

To replace an ISO 15552 cylinder with this SKU, match the 50 mm bore, 60 mm nominal stroke, 10 mm adjustment range, PT port threads, and the -S magnet. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR mounts. Operating speed ranges from 30 to 800 mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S FAQ

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 10 mm. This provides a usable travel window of 50 to 60 mm, allowing you to fine-tune the end position at commissioning without replacing the cylinder.

At 0.7 MPa, the push force increases to 1374 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X60-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.