verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X60-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke60 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$85.11 $92.61Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20

The AirTAC SAIJ50X60-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 60 mm stroke that can be mechanically dialed back by up to 20 mm, yielding a highly flexible 40-60 mm usable travel window.

This extruded aluminum profile cylinder features a 20 mm diameter carbon steel piston rod with an M16x1.5 thread, designed to handle moderate side loads effectively. It uses PT tapered port threads (G1/8) and includes variable air cushions at both ends to decelerate the load smoothly. The rear adjuster acts purely as a travel stop and does not lock the load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X60-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke60 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×60Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20 Is Used

settings_input_component

Machine Changeover

Dial in the 40-60 mm travel window during product size transitions to set new end stops without replacing the cylinder or adding shims.

conveyor_belt

Diverting Stops

Adjust the retract position of conveyor routing stops on the fly to accommodate varying package lengths in material handling.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20 the Right Cylinder?

The adjustable 40-60 mm window is ideal for product size changeovers on a packaging line. If your setup requires less force, stepping down to a 40 mm bore yields 628 N; if you need more clamping power, stepping up to a 63 mm bore provides 1559 N.

For a direct replacement, match the 50 mm bore, 60 mm stroke, 20 mm adjustment range, PT port thread, and standard carbon steel rod. Since this is an adjustable-stroke model, it supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Remember that neither the rear adjuster nor the air cushions will hold a load safely without continuous air pressure; for dead-air load holding, consider an external pilot-operated check valve or a SAIL locking cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20 FAQ

It features a rear mechanical stopper that allows you to trim the effective stroke by up to 20 mm. This creates a usable travel window of 40 to 60 mm, letting you fine-tune the end position at commissioning without changing the cylinder.

At its maximum 1.0 MPa pressure, it can deliver up to 200 kgf.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X60-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.