
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X60-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X60-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. It provides a usable travel window of 30 to 60 mm, letting you trim the nominal 60 mm stroke back by up to 30 mm without swapping out the unit.
This extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this non-magnet variant requires a -S suffix for sensor feedback. The carbon steel rod uses an M16x1.5 thread, and the PT tapered port threads ensure a tight pneumatic seal. The rear adjuster acts purely as a mechanical stop for position tuning, meaning it will not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 30 to 60 mm during machine commissioning to accommodate varying product sizes without external spacers.
Quickly adjust the stroke window on packaging or assembly lines when switching between different product lengths, minimizing downtime.
Use the fine-tuning capability to set precise clamping or ejection positions on fixtures where exact end-of-travel matters.
The adjustable stroke is ideal for machine setup and product changeovers, allowing you to dial in the exact end-stop at commissioning rather than machining external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series, as this cylinder's adjuster is not a locking mechanism.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 60 mm nominal stroke, 30 mm adjustment range, PT G1/4 ports, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set. Since the stroke is under 300 mm, side-load stress is minimal, but always ensure the M16x1.5 rod thread is properly aligned to prevent premature seal wear.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear mechanical stopper allows you to shorten the effective travel from the 60 mm nominal stroke down to as little as 30 mm, giving a 30-60 mm usable window. It acts as a travel stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.