
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X60-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 60 mm nominal stroke that can be dialed back by up to 30 mm, providing a usable travel window of 30-60 mm for precise end-position tuning at commissioning.
This variant includes a magnet for CMSE and DMSE sensors and uses a carbon steel rod with PT tapered ports. The extruded aluminum barrel incorporates sensor grooves on both sides. The rear screw acts purely as a travel stop for product changeovers and does not hold the load without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 30-60 mm travel window on packaging lines to accommodate different carton sizes without swapping cylinders or adding external stops.
Fine-tune the retract stroke during machine commissioning to perfectly seat parts, using the rear adjuster to absorb mechanical tolerances.
Implement flexible physical stops on assembly fixtures where the exact end position needs frequent adjustment based on the workpiece.
The 30 mm adjustment range is ideal for machines requiring variable end-stops during product changeovers, functioning as a setup stop rather than a lock. For load-holding without live pressure, consider the SAIL or BSAI series.
To replace an ISO 15552 cylinder, match the 50 mm bore, 60 mm stroke, 30 mm adjustment, PT port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. With a 16 mm rod and M12x1.25 thread, it handles moderate side loads well within its 30-800 mm/s speed range.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the 60 mm nominal stroke by up to 30 mm, creating a usable travel window of 30-60 mm. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.