
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X60-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X60-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 50mm bore and a 60mm nominal stroke, yielding a usable travel window of 10 to 60mm. This wide adjustment range allows you to dial in the exact end position during commissioning without swapping out the barrel or adding external stops.
This model incorporates an extruded aluminum barrel with sensor grooves on both sides, though this specific SKU is supplied without a magnet. The piston rod is carbon steel with an M16x1.5 thread, and the fluid port is PT (tapered) G1/4. The rear adjuster acts purely as a mechanical stop to set the retract position; it does not hold the load without live air pressure. For applications requiring position holding without compressed air, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X60-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract stop during product size changes on a packaging line without physically replacing the cylinder or adding shims.
Fine-tune the stroke from 60mm down to 10mm to perfectly seat a part or apply clamping force without overshooting the target.
Set the exact ejection distance for varying product heights, using the rear screw to safely limit the retract travel.
Choose this 50mm bore when you need higher force than a 40mm cylinder (628N at 0.5 MPa) but want to avoid the bulk of a 63mm model (1559N). The 50mm bore hits a practical sweet spot for mid-range actuation. An adjustable stroke is ideal for machine setups that undergo frequent product changeovers, letting you vary the end-stop on the fly instead of installing fixed-length SAI cylinders.
When ordering, confirm the bore (50), stroke (60), adjustment (50), port (PT G1/4), and mounting choice. SAIJ supports a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard cylinders. Because the nominal stroke is only 60mm, side-loading is less of a concern than with long strokes, but external guidance is still recommended for heavy loads.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 200 kgf.
The SAIJ50X60-50 has a 60mm nominal stroke with a 50mm adjustment range, giving a usable travel window of 10 to 60mm. A rear screw acts as a mechanical stop to trim the retract position, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.