verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X600-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke600 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$144.66 $152.16Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100

The AirTAC SAIJ50X600-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 600 mm stroke that can be dialed back by up to 100 mm, yielding a precise 500-600 mm usable travel window for fine-tuning end positions during commissioning.

This extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. The rear adjuster acts purely as a mechanical stop to set the retract position and relies on the standard variable air cushions for end-of-stroke deceleration. It is not a locking device and will not hold a load without live air pressure.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X600-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke600 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×600Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100 Is Used

settings_input_component

Product Size Changeover

Dial in the 500-600 mm travel window during format changeovers on packaging lines, using the rear stopper to set new retract limits without changing hardware.

conveyor_belt

Variable End-Stop Positioning

Adjust the stroke end-point on the fly for conveyor sorting gates that must handle varying package lengths on a single pneumatic axis.

tune

Commissioning Fine-Tuning

Trim the effective stroke by up to 100 mm during machine setup to perfectly time the kinematics without machining custom external spacers.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100 the Right Cylinder?

Choose this 50 mm bore when an application requires moderate thrust, stepping up from a 40 mm bore that provides 628 N at 0.5 MPa, or down from a 63 mm bore yielding 1559 N. An adjustable stroke is ideal here over a fixed SAI model because the 100 mm trim range allows rapid product-size changeovers on a line without swapping the cylinder or adding external stops. To match this exact configuration for an ISO 15552 replacement, specify a 50 mm bore, 600 mm stroke, 100 mm adjustment, PT ports, and no magnet.

Because the 600 mm stroke is substantial, the 20 mm carbon steel rod will experience leverage forces under side loading. Even with the robust M16x1.5 rod thread, an external guide rail should be installed to support the load and prevent premature seal wear. For applications requiring the piston to hold its position without continuous air pressure, a plain SAIJ is insufficient; consider an AirTAC SAIL with an air-released lock or a BSAI clamp-lock cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100 FAQ

If pressure is increased to 0.7 MPa, the push force rises to 1374 N.

The rear adjuster acts as a mechanical stop that allows you to shorten the 600 mm nominal stroke by up to 100 mm, creating a 500-600 mm usable travel window. It only sets the travel end and relies on the air cushion for deceleration; it does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X600-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.