
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X600-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X600-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel end-point at commissioning. With a nominal 600 mm stroke and a 40 mm adjustment range, it provides a usable travel window of 560 to 600 mm. This built-in stopper lets you dial in the exact retract position without swapping out the cylinder or adding external physical stops during product changeovers.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X600-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reposition the retract end-stop within the 560-600 mm window when switching machinery to handle a different product length.
Dial in the exact 600 mm travel limit during machine commissioning to perfect timing without fabricating custom external spacers.
Adapt the stopping point on a moving line by turning the rear adjuster screw, accommodating various package sizes on the fly.
Choose this 50 mm bore if you need more thrust than the 40 mm class (628 N at 0.5 MPa) but want a smaller footprint than the 63 mm class (1559 N at 0.5 MPa). The adjustable stroke is ideal for variable end-stops on a line, whereas a fixed SAI cylinder requires manual shims for changeovers. When ordering, specify the PT tapered port thread, carbon steel rod, and your preferred mounting accessory.
Because the nominal stroke is 600 mm, the 20 mm rod experiences leverage forces over a long travel distance; an external guide is recommended to prevent side-load damage. Remember that the rear adjuster acts as a travel stop and does not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from 600 mm down to as little as 560 mm, providing a 560-600 mm usable window. It trims the retract end-position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.