
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X65-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X65-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 40 mm. This creates a usable stroke window of 25-65 mm, letting you dial in the exact end position during commissioning without swapping out the cylinder or adding external stops.
Equipped with a magnet for position sensing, this model supports AirTAC CMSE reed and DMSE electronic sensors via the dual-sided sensor grooves on the extruded aluminum barrel. The 20 mm piston rod uses an M16x1.5 thread and pairs with 30 mm air cushions at both ends to manage end-of-stroke impact. The rear adjuster acts purely as a mechanical stop for position tuning and does not hold the load without continuous air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X65-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 25-65 mm travel window on the fly when switching production lines to accommodate different product lengths without changing hardware.
Dial in the exact retract end-position during initial commissioning to perfect a pressing or clamping operation, avoiding mechanical shim plates.
Adjust the diverting stroke length on a conveyor guide to handle varying package sizes on the fly while maintaining consistent push force.
Select this 50 mm bore adjustable-stroke cylinder when your application requires variable end-stops or frequent product changeovers, rather than committing to a fixed-stroke SAI variant. If your process demands less force, stepping down to a 40 mm bore yields 628 N at 0.5 MPa. For heavier positioning tasks, an 80 mm bore provides 2513 N at the same pressure.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 65 mm nominal stroke, 40 mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. For any load-holding requirements without live air pressure, note that this adjuster is not a lock; you must look to the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the nominal 65 mm stroke by up to 40 mm, providing a usable travel window of 25-65 mm. It acts as a mechanical stop to set the end position and is not a lock, meaning it will not hold the load without live air pressure.
At 0.7 MPa, the push force increases to 1374 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.