verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100

The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X650-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke650 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$157.22 $164.72Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ50 stroke, mounting and version on one page All SAIJ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100

The AirTAC SAIJ50X650-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in adjusting screw allows you to trim the effective travel anywhere within a 550-650 mm window, providing precise end-position tuning without swapping out the entire unit.

Because the nominal 650 mm stroke is quite long, the 20 mm rod diameter should be paired with an external guide to manage side loads and prevent rod bending. The extruded aluminum barrel features sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. This adjustable configuration uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100 Technical Specifications

ModelAirtac SAIJ50 Adjustable Cylinder SAIJ50X650-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100

SAIISO 15552 profile-barrel cylinder series.
50Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100 Is Used

conveyor_belt

Product Size Changeovers

Quickly adapt a packaging line for different carton lengths by dialing the stroke back from 650 mm to 550 mm via the rear stopper.

precision_manufacturing

Machine Setup Tuning

Fine-tune the extended end position during initial commissioning to achieve exact alignment without fabricating custom spacer blocks.

factory

Variable End Stops

Provide a flexible reach window for automated assembly equipment where the target distance varies slightly between production runs.

Is the Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100 the Right Cylinder?

An adjustable stroke is ideal here for product changeovers on a line, letting you dial in the exact 550-650 mm end stop during commissioning rather than machining external stops. The rear screw acts purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an external rod lock or the AirTAC SAIL series.

To match this ISO 15552 cylinder exactly for a replacement, verify the 650 mm stroke, the 100 mm adjustment range, PT tapered port threads, and the standard carbon steel rod. Given the 650 mm length, ensure your mounting choice—such as TC or LB—properly supports the barrel to minimize deflection during operation.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100 FAQ

At 0.7 MPa, the push force increases to 1374 N.

The rear adjuster screw allows you to shorten the 650 mm nominal stroke by up to 100 mm, creating a usable travel window of 550 to 650 mm. The adjuster functions as a mechanical stop to set the position and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ50X650-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.