
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X650-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X650-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster.
Equipped with a 20mm diameter carbon steel rod and M16x1.5 threading, it handles side loads well, though a 650mm length still benefits from an external guide. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, and it omits FB, CA, CB, and CR mounts, utilizing only Basic, FA, LB, TC, FTC, TCM1, and TCM2 hardware.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 630-650mm travel end-position during initial commissioning without swapping the entire cylinder or adding external stopper blocks.
Quickly adapt automated lines to varying product lengths by dialing the stroke back up to 20mm directly at the rear adjustment screw.
Adjust the diverter arm reach precisely to match package dimensions on the fly, ensuring accurate routing without mechanical rebuilds.
The adjustable stroke is selected over a fixed SAI cylinder when you need variable end-stops for product changeovers or fine position tuning at setup. Remember, the rear adjuster acts only as a travel stop, not a load lock; for position holding without live air, use an external rod lock or pilot-operated check valve. Because the stroke is 650mm, always use an external guide to prevent rod bending under heavy side loads.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 200 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 650mm down to 630mm. This creates a 630-650mm usable window for fine-tuning the end position without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.