
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X650-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel rod and PT tapered port threads. By turning the rear screw, you can trim the effective travel within a 620-650mm window, providing exact end-position tuning without adding external stops.
This adjustable-stroke design is ideal for product changeovers, letting you fine-tune the retraction point on the fly. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for dead-load holding, consider a SAIL or BSAI variant. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 620-650mm retraction point during product family changeovers without physically swapping the cylinder or bolting on external stops.
Adjust the rear stopper screw to alter the effective stroke length on the fly, accommodating different package sizes on a packaging line.
Choose this 50mm bore when you need more thrust than a 40mm cylinder (628N at 0.5MPa) but want a smaller footprint than a 63mm option (1559N at 0.5MPa). The 30mm adjustment range is perfect for dialing in exact retraction distances during machine setup. Because the 650mm stroke is relatively long, an external guide is recommended to handle side loading and prevent rod binding.
When matching this ISO 15552 cylinder for a replacement, verify the 50mm bore, 650mm stroke, 30mm adjustment, PT port threads, and carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Note that this unit lacks the -S magnet suffix, so position sensing is not supported out of the box.
Quick checklist
The maximum thrust is 200kgf at 1.0MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 650mm nominal stroke by up to 30mm, creating a 620-650mm usable travel window. It functions as a travel stop and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.