
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X650-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X650-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 610-650 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is specified later.
This model uses a PT tapered port thread and a 20 mm carbon steel rod with an M16x1.5 thread. The rear adjuster acts purely as a mechanical stop to fine-tune the retract end position during commissioning; it does not hold the load without live air pressure. For load-holding requirements without continuous pneumatic pressure, an external rod lock or an AirTAC SAIL cylinder is required.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 610-650 mm travel window during packaging line format changes to accommodate different carton widths without swapping cylinders.
Fine-tune the retract position during machine commissioning to perfect the pick-and-place alignment of mid-weight components.
Adjust the stroke on a sorting diverter to handle varying product lengths on the fly without halting production for mechanical modifications.
An adjustable stroke is selected over a fixed SAI cylinder when you need to dial in the exact end-of-travel position during product changeovers without adding external stops. To replace this cylinder on an ISO 15552 footprint, match the 50 mm bore, 650 mm stroke, 40 mm adjustment, PT port, and standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the 650 mm stroke is relatively long, the unsupported rod is susceptible to deflection and side loads. Even with the robust 20 mm rod and M16x1.5 thread, you should incorporate an external guide rail to prevent binding and premature seal wear.
Quick checklist
If your system runs at 0.7 MPa, the push force increases to 1374 N.
The rear mechanical stopper allows you to shorten the effective travel from the nominal 650 mm down to 610 mm. This adjuster functions only as a travel stop to set the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.