
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X650-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X650-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 650 mm nominal stroke that can be fine-tuned backward by up to 75 mm, yielding a usable travel window of 575 to 650 mm.
This extruded aluminum profile cylinder features a 20 mm carbon steel rod and a G1/4 PT port. The rear adjusting screw acts purely as a mechanical stop to set the retract position and does not hold the load without live air. It retains the standard ISO 15552 mounting footprint while offering sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X650-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 575-650 mm retract distance during format changes on packaging lines, avoiding the need to physically swap out long-stroke cylinders.
Fine-tune the final resting position of a tooling head at machine commissioning, using the rear screw to absorb mechanical tolerances perfectly.
Adjust the stroke window on a sorting conveyor to accommodate different package lengths without repositioning the cylinder's physical mounts.
If your setup requires less force, stepping down to a 40 mm bore yields 628 N; if you need more clamping power, a 63 mm bore provides 1559 N. Because the 650 mm stroke is relatively long, an external guide is recommended to prevent excessive side-loading on the 20 mm rod.
The rear adjuster is a travel stop, not a lock, so the cylinder cannot hold a load without continuous air pressure. For dead-load holding, consider the SAIL or BSAI variants. To match this exact unit for an ISO 15552 replacement, specify the 50 mm bore, 650 mm stroke, 75 mm adjustment, PT port thread, and no magnet. The compatible mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
If operated at 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw lets you shorten the 650 mm nominal stroke by up to 75 mm, creating a 575 to 650 mm travel window. It functions as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.