The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and PT tapered port threads. By integrating an external adjusting screw, this model allows you to dial back the nominal 70mm stroke by up to 10mm, creating a precise 60-70mm usable travel window for exact end-position tuning.
This fine-tuning capability is ideal for product changeovers or setup commissioning, eliminating the need to swap the entire cylinder or bolt on external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 60-70mm travel window during initial machine commissioning to achieve perfect seating without adding external shims.
Quickly adjust the retract end-position by up to 10mm on packaging lines running multiple product sizes.
Dial in the exact clamping distance for delicate assemblies where a fixed 70mm stroke would apply too much pressure.
Select this 50mm bore cylinder when an application requires moderate thrust and variable end-stops. The SAIJ50X70-10 is chosen over a fixed SAI model when commissioning demands a variable end-stop rather than a locked travel distance. To match this cylinder for an ISO 15552 replacement, verify the 70mm stroke, 10mm adjustment range, PT G1/4 port, and mounting style. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
At 0.7MPa, the push force increases to 1374N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 70mm down to 60mm. This creates a 60-70mm usable window for fine-tuning the end position at commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.